S-3L double-layer glass reactor
The S-3L double-layer glass reactor is designed as double-layer glass. The inner layer is placed in the reaction medium for stirring reaction.
- Place of Origin:Zhengzhou, Henan
- Custom processing:Yes
- Brand:ZZKD
S-3L double-layer glass reactor product introduction
The S-3L double-layer glass reactor is designed as double-layer glass. The inner layer is placed in the reaction medium for stirring reaction. The interlayer can be heated or cooled by different cold and heat sources (refrigerant, hot water or hot oil). . Under the constant temperature condition, in a closed glass reactor, the stirring reaction can be carried out under normal pressure or negative pressure according to the use requirements, and the reflux and distillation of the reaction solution can be performed. It is a modern fine chemical factory, biopharmaceutical and The ideal pilot and production equipment for the synthesis of new materials.
S-3L double-layer glass reactor product details
S-3L double-layer glass reactor product features
1. GG17 high-borosilicate glass with nice physical-chemical properties; experiment temperature -100 to 400 degree C; Resistant to strong acidic properties of materials; only touching with glass parts & PTFE, no cross-contamination.
2. Double cylinder; kettle cover is separated from kettle body. It is convenient to disassemble, clean and install.
3. Stirring adopts to mechanical sealing, it keeps higher vacuum degree among the same products in the market. It also keeps high vacuum degree when stirring.
4. Glass discharge valve, non-dead angle mixing, fast emptying, no residue.
5. Frequency control speed gear motor, smooth running，high torque, automatic booster, no spark, noise free, long life.
6. SUS frame and cast aluminum material kettle body support, elegant appearance, stable structure.
7. Circulating water/oil bath, high and low temperature machine can supply heating source; Cooling machine: cooling chiller，providing refrigeration source.
8. Scientific & innovative structure, practical, elegant appearance, domestic industry-leading.
9. Explosion proof is optional.
S-3L double-layer glass reactor product instructions
● Please familiarize yourself with the contents of this manual before installation, use, maintenance, and inspection.
● The power supply voltage must be the same as specified in the instrument.
● No load is not suitable for high speed operation.
● The life of the electrical box is affected by the surrounding temperature and humidity. Please keep the speed and the motor dry.
● Install the machine first and then be wired by a professional electrician. The ground terminal must be grounded. The high temperature bath must be connected to the open switch.
● Within 5 minutes after the power is turned off, there is a possibility of electric shock due to discharge of the inverter or capacitor.
● Pay attention to the impact of hard objects (watches, rings, belt buckles, etc.) on the glass during work.
● Be careful when connecting vacuum tubes or water pipes to avoid excessive damage to the human body caused by broken glass.
● When you need to use the high-temperature circulating oil bath, pay attention to the high temperature damage to the human body. We recommend using a heat-conducting oil (dimethicone, kinematic viscosity of 100) which is harmful to human body. In particular, when paying attention to high temperature circulation, the circulating pump should be turned on first to allow the heat transfer solvent to circulate, and then slowly heat up.
S-3L double-layer glass reactor product working principle
The double-layer glass reactor interlayer is injected with a constant temperature (high temperature or low temperature) hot-dissolving medium or a cooling medium, and the contents of the reactor are heated or cooled at a constant temperature, and stirring can be provided. The material is reacted in the reaction kettle, and the evaporation and reflux of the reaction solution can be controlled. After the reaction is completed, the material can be discharged from the discharge port of the bottom of the kettle, and the operation is extremely convenient. It is an ideal equipment for modern chemical samples, sample experiments, biopharmaceuticals and new materials. Can provide high temperature reaction (configure the corresponding circulating oil bath, the maximum temperature can reach 300 ° C); can also do low temperature reaction (configure the corresponding low temperature chilling liquid circulation system, the lowest temperature can reach -80 ° C); Vacuum to do the vacuum reaction. Moreover, its unique design makes the test safer and more convenient.
Warranty & Service:
Pre-service
24 Hours online service for your consult.
Help choose right model,and a series of service,person,advise.
Middle service
--Give you best offer
--Provide discount for many sets order
--Do customer's request:
--Choose payment term you convienent.
--Promptly production and delivery,inform you in time.
--Can provide invoice value as you like to decrease your tax.
After sale service
--1 year warranty service and all life maintenance.
--Technical Egineer are avalible for oversea trainning.
--Free change for some parts
--Remote control technical consult
--Free installation DVD
--Maintenance plan
GET A QUOTE
Q: What are the heating methods for the glass reactor?
A: 1. Electric heating: The electric resistance wire is wound on the insulating layer of the reaction vessel body or installed on a special insulator at a certain distance from the reaction vessel. Therefore, a small space gap is formed between the electric resistance wire and the reaction vessel body.
2. Water heating: It can be used when the temperature is not high. The heating system has two types: open type and closed type. The open type is relatively simple. It consists of a circulating pump, a water tank, a pipe and a regulator for controlling the valve. When high pressure water is used, the mechanical strength of the equipment is high, the outer surface of the reactor is welded with a coil, and the coil has a gap with the wall of the kettle. The thermal resistance increases and the heat transfer effect decreases.
3. Steam heating: When the heating temperature is below 100 °C, it can be heated by steam below one atmosphere; in the range of 100~180 °C, saturated steam; when the temperature is higher, high pressure superheated steam can be used.
4, other medium heating: If the process requires high temperature operation or to avoid the use of high pressure heating system, other media can be used instead of water and steam, such as mineral oil (275 ~ 300 ° C), diphenyl ether mixture (boiling point 258 ° C), molten salt (140 ~ 540 ° C), liquid lead (melting point 327 ° C) and so on.