Glass reactor manufacturers provide you with single-layer glass reactor, double-layer glass reactor, jacketed glass reactor, explosion-proof glass reactor and supporting equipment
Glass reactors can generally be divided into two categories, one is a double-layer glass reactor, and the other is a single-layer glass reactor. Here the glass reactor manufacturer introduces the double glass reactor for you. The double glass reactor produced by us is divided into 1L double glass reactor, 2L double glass reactor, 3L double glass reactor. , 5L double glass reactor, 10L double glass reactor, 20L double glass reactor, 30L double glass reactor, 50L double glass reactor and 100L double glass reactor.In addition, we also develop and produce a new type of glass reactor according to the actual needs of customers, that is, explosion-proof glass reactors.
The double-layer glass reactor has standard components including a stirring motor, a governor, a condenser, a continuous titration funnel, a vacuum plug, a vacuum tip, a thermometer housing, a reaction kettle, and a two-meter thermally conductive silicone rubber tube. Under constant temperature conditions, the stirring reaction can be operated under normal pressure and negative pressure according to the requirements of use. In addition, reflux and distillation of the reaction solution can also be performed. Therefore, double glass reactors can be used in biopharmaceuticals, fine chemical plants and the synthesis of new materials.
Glass reactors can not only complete high temperature experiments but also low temperature reactions. The heating of the double-layer glass reaction kettle is completely completed through the interlayer. Specifically, firstly, the double-layer kettle is connected to the circulating oil bath and the heat transfer oil is passed through the jacket. The power can be heated by plugging in the power supply. The same is true, just replace the solvent in the interlayer with ethanol. The interlayer can make the material be heated uniformly, and at the same time, it is convenient to directly observe the stirring reaction process of the material. Therefore, the role of double-layer glass reactors in sandwiching cannot be underestimated, which is why double-layer reactors are becoming more and more popular. Many customers will ask if the jacketed glass reactor is the same as the double glass reactor? Regarding this issue, the industry stated that, in fact, from a structural point of view, both the jacketed glass reactor and the double-layered glass reactor are composed of the kettle body, kettle lid, jacket, transmission equipment, shaft sealing equipment, agitator and support. And other components, stirring methods are also paddle, anchor, turbine and so on. And both are produced with high borosilicate glass, with good chemical and physical properties, relatively constant speed, and safe and stable continuous work. However, the double-layer glass reaction kettle is a reaction solution with an inner layer to stir the reaction, and the interlayer can be heated or cooled by a cold and heat source; while the glass interlayer interface of the jacketed glass reactor is heated by circulating hot oil through the circulation to perform the heating reaction. , Frozen feasible low temperature reaction. Therefore, there are some differences between the two.
What are the supporting equipment for glass reactors?
 |
 |
 |
 |
So how to maintain the glass reactor?
1. Check the instrument carefully before use, whether the glass bottle is damaged, and whether the interfaces are consistent. Pay attention to handling.
2. Wipe each interface with a soft cloth (can be replaced with a napkin), and then apply a little vacuum grease. (Vacuum grease must be covered after use to prevent lime sand from entering.)
3. The interfaces of the glass reaction kettle should not be tightened too tightly. Regular loosening should be avoided to prevent the connector from biting due to long-term locking.
4. Turn on the power switch first, and then let the machine run from slow to fast. When the machine is stopped, keep the machine in a stopped state, and then turn off the switch.
5. The PTFE switch can't be tightened too much, it is easy to damage the glass.
6, after each use must be cleaned with a soft cloth of various oil marks, stains, solvents remaining on the surface of the machine, keep clean.
7. Loosen each PTFE switch after shutdown. Long-term standing in working condition will deform the PTFE piston.
8. Regularly clean the seal ring by removing the seal ring, checking for dirt on the shaft, wiping it with a soft cloth, applying a little vacuum grease, and reinstalling it to keep the shaft and seal ring smooth.
9, the electrical part must not enter the water, moisture is strictly prohibited.
10. It is necessary to purchase original genuine accessories, and the random use of other accessories will cause fatal damage to the machine.
11. When making any repairs or inspections to the glass reactor, be sure to cut off the power and water first.
I will analyze the single-layer glass reactor in detail in the next article. If you want to learn more about glass reactor equipment or need to purchase glass reactor equipment, please contact us via email([email protected]) or WhatsApp(+86 18739897890), and look forward to hearing from you Cooperation!
Add your message