Double-layer glass reactor supplier provides you with jacketed glass reactor equipment, maintenance method of glass reactor and of glass reactor advantages
The double-layer glass reactor is injected into a thermo-dissolving or cooling medium at a constant temperature (high or low temperature) through a reaction container sandwich, and the materials in the reaction kettle are heated or cooled at a constant temperature and stirred. can provide. The reaction medium is placed in the inner layer of the double-layer glass reaction kettle to perform the stirring reaction.The interlayer is circulated through cold and heat sources (refrigerant, water, heat-conducting oil) to allow the inner layer to achieve constant temperature heating or cooling reaction, and control the distillation and reflux of the reaction solvent . After the reaction is completed, the material can be discharged from the discharge port at the bottom of the kettle, which is convenient to operate. It is the ideal equipment for modern chemical samples, sample experiments, biopharmaceuticals and new materials.
◆ Distillation and reflux can be performed simultaneously
◆ Special long-acting stirring seal
◆ Imported variable frequency speed regulation or electronic stepless speed regulation, AC precision deceleration motor driven stirring, strong stirring force, no brush, no spark
◆ The material is in contact with GG17 glass and PTFE, no cross pollution
◆ Digital display speed and high and low temperature display, easy to operate
The precautions for maintenance of the double glass reactor are as follows:
1. Clean all glass pieces before installation.
2. Each standard mouth, ball mill mouth and sealing surface should be coated with a small amount of vacuum silicone grease to increase air tightness.
3. Please read the entire contents of this manual before installation, use, maintenance and inspection to ensure correct use. 4. The power supply voltage must be the same as that specified by the instrument.
5. It is not suitable for high speed operation under no load.
6, the life of the electrical box and the surrounding temperature, humidity have a great impact. Keep the governor and motor dry.
7. Install the equipment of the reactor first and then use the equipment by professional operators.
Add your message